Comet H0430 temperature sensor and controller with RS485 output :: KALIST AKL s.r.o.

Comet H0430 temperature sensor and controller with RS485 output

Comet H0430 temperature sensor and controller with RS485 output
Add to favourites Add to compare list

Comet H0430 temperature sensor and controller with RS485 output

can be calibrated 3 years warranty IP65
Extended Warranty Calibration sheet Accredited Authorized sales IP65 certification
Comet The Comet H0430 is designed for online temperature monitoring using a built-in sensor and dual-state variables from three binary inputs. The device is equipped with two relay outputs, which are used for alarm signaling or control of external devices. Each relay can be assigned any input quantity, set a comparison limit, delay, hysteresis or acoustic alarm, or its status can be remotely controlled using the Modbus communication protocol. The device communicates via RS485 bus, supports Modbus RTU communication protocols and a protocol based on the Advantech-ADAM standard. The sensor is configured from the manufacturer to the Modbus RTU communication protocol. The sensor is set up using the TSensor software. The instrument is designed for measuring air without aggressive impurities. We can provide you with a calibration certificate for accurate measurements. You can select the calibration in the product form. More
Product code: COM-H0430 Shipping and Payment
297,09 € excl. VAT (359,48 € incl. VAT)
Specify product selection
No calibration Calibration of the logger for refrigerators +2°C/+4°C/+8°C Logger calibration for medicine storage 0°C/+15°C/+25°C Logger calibration at room temperature +10°C/+20°C/+30°C Logger temperature calibration - own 3 calibration points
In stock - in an external warehouse, shipping 1 - 3 days
Comet The Comet H0430 is designed for online temperature monitoring using a built-in sensor and dual-state variables from three binary inputs. The device is equipped with two relay outputs, which are used for alarm signaling or control of external devices. Each relay can be assigned any input quantity, set a comparison limit, delay, hysteresis or acoustic alarm, or its status can be remotely controlled using the Modbus communication protocol. The device communicates via RS485 bus, supports Modbus RTU communication protocols and a protocol based on the Advantech-ADAM standard. The sensor is configured from the manufacturer to the Modbus RTU communication protocol. The sensor is set up using the TSensor software. The instrument is designed for measuring air without aggressive impurities. We can provide you with a calibration certificate for accurate measurements. You can select the calibration in the product form. More
Product code: COM-H0430 Shipping and Payment

Features and Benefits of Comet H0430

  • Built-in temperature sensor.
  • Three binary inputs for monitoring two-state variables - e.g. smoke detectors, flood detectors, glass break detectors, door contacts, etc.
  • Acoustic alarm indication (can be switched off).
  • Communication protocols ModBus RTU and Advantech ADAM compatible protocol.
  • Power supply 9-30 Vdc.
  • Sensor setup using the T-sensor operating software, which is free to download.
  • Extended warranty 3 years.

Included:

  • H0430
  • Instructions for use
  • FREE TSensor setup software
The text was translated by an automatic translator.
Parameters
Advanced features Alarm Binary input Comet database software Database viewer Display Extended Warranty IP protection Relay output RS 485 Temperature
Temperature range (max) 80 °C
Temperature range (min) -30 °C
Temperature resolution 0,1 °C
Temperature measurement accuracy ± 0,4 °C
Connectivity RS 485
Communication protocols ModBus RTU, Advantech ADAM
cover IP40, IP65, IP65 elektronika / IP40 senzory
Dimensions: 136 x 159 x 45 mm / délka stonku 53 mm
Signal for binary inputs from a voltage-free contact, an open collector or a two-level voltage signal. The inputs are not galvanically isolated.
Minimum pulse length on the binary input 500 ms
Maximum switched voltage, current, relay power 50V, 2A, 60VA
Download
Popis komunikačních protokolů snímačů řady Tx3xx a Tx4xx s digitálním komunikačním rozhraním RS232 a RS485.pdf (pdf, 513.4 kB)
i-hgs-h_x43x.pdf (pdf, 2.1 MB)
i-hgs-n-hx4xx.pdf (pdf, 1 MB)
a-hgs-hxxxx.pdf (pdf, 103.9 kB)
cz_comet_digital_sensors.pdf (pdf, 7.6 MB)
dbviewer-3-12-0-0_dbapi-19-0.exe (exe, 22.1 MB)
tsensor-3-3-9-0.exe (exe, 2.7 MB)
sensorreader-2-0-6-0.exe (exe, 2.8 MB)
conversions.exe (exe, 694.5 kB)
In this section, you will find answers to frequently asked questions regarding use, measurement accuracy, verification, and calibration. If you cannot find the information you are looking for here, please do not hesitate to contact us—we will be happy to provide you with details based on how you use the measuring device. Telefon: +420 771 230 755 E-mail: kalist@kalist.cz

Related products5

Next

Alternative products14

Next
%s ...
%s
%image %title %code %s
%s