Multilogger Comet M1300

More photos (9)

Add to favourites Add to compare list

Multilogger Comet M1300

Professional 3 years warranty

Extended Warranty Professional use Authorized sales

The professional multilogger Comet M1300 is equipped with four inputs for the terminal block. These offer the connection of external probes for measuring DC current, voltage or pulses and pulses. It then stores the measured data in an internal, energy-independent memory. The data is then accessible via a USB cable or via an Ethernet network. It can then be analysed using the Come Vision operator software, which is free of charge. More

Product code: COM-M1300 Shipping and Payment

758,72 € excl. VAT (918,05 € incl. VAT)

Product code: COM-M1300 Shipping and Payment

Konektory pro svorkovnice

Two MiniDIN inputs and terminal block inputs

Sensors with voltage output (range 0-10 V; accuracy ±10 mV)
Sensors with current output (range 0-20 mA; accuracy ±20 µA)
Two-state signal (no-voltage contact or 0-30V voltage signal); only input #3 and #4 can be used as binary
Pulse signal (voltage-free contact or 0-30V voltage signal); only input 4 can be used as a counter

Displej

Evaluation of up to 16 variables

Up to 16 variables can be evaluated from 4 connected probes/sensors. This is the sum of the number of measured and calculated quantities. E.g. dew point, absolute humidity, specific enthalpy, inter-channel calculations (e.g. difference from two connected temperature probes, sensors, etc.).Multilogger LCD display detail.

Measured values are stored in an internal, non-volatile memory. Memory capacity is up to 1 million values. The recording mode can optionally be set as non-cyclical, where the recording stops when the memory is full, or cyclical, where the oldest recorded values are overwritten with new values when the memory is full.

The values are displayed on a graphic display with the option of adjusting the backlight intensity and changing the size of the displayed digits. The data can be further processed using COMET Vision software.

Power supply

The instrument can be powered by a mains adapter or by rechargeable batteries with the possibility of recharging directly in the instrument. The batteries are always included with the instrument (standard AA alkaline batteries can also be used). The batteries ensure the operation of the instrument for several months.

When simultaneously powered by a mains adapter, the batteries provide back-up operation and ensure recording and measurement during power failure. By powering the Ethernet output from the batteries, the instrument notifies you of an outage by email.

Alarm limits and alarm signalling

Two independent alarm limits can be set for each channel (i.e. measured or calculated quantity).

Alarm signalling can be acoustic, optical, by sending a warning email or by alarm output. External acoustic or visual signalling can be connected to the alarm output. The instrument can supply 5V to this device, otherwise the device needs to be powered externally.

Communication interface

The instrument is always equipped with a USB connector, which is used for communication, data handling and also for charging the instrument's battery.

Send an e-mail when an alarm condition occurs or ceases
in the event of an outage, use the DATALINK function to transfer data back to COMET Database, a software that has many advanced data analysis tools
Simple wireless communication with TP-LINK Wi-Fi router
third-party programs to read currently measured values using universal SNMPv1 and XML protocols
use the WWW interface to display currently measured values and set basic parameters without the need to install software

ALARM OUT output

The two-state output is designed to control other devices during an alarm, e.g. external acoustic alarm, telephone annunciator, etc.
Output type - transistor with open collector
Max. current in switched state - 100 mA
Max. output voltage 12 V
Auxiliary terminal voltage - +5 V (only when external voltage is connected)
Alarm signalling can be acoustic (by built-in inverter), optical (3x LED), by alarm output or by sending a warning e-mail via ethernet.

The text was translated by an automatic translator.

Parameters

Meter function
Advanced features
Voltage measurement range (max)	10 V
Voltage measurement accuracy	±10 mV
Voltage measurement resolution	100 µV
DC current measurement range (max)	20 mA
Resolution of ss current measurement	0,1 µA
Accuracy of ss current measurement	±20 µA
Memory (number of measurements)	1,000,000 values (non-cyclic recording), 600,000 values (cyclic recording)
Connectors for sensors
Connectivity	Ethernet, RS 232, USB
Communication protocols	WWW, SNMPv1, XML, DATALINK
Sensor type	Voltage sensor, Current sensor, Two-state sensor, Pulse sensor
power supply	3x AA NiMH 1900 mAh, 1,2 V; adaptér 230Vac/5Vdc (pro ethernetové rozhraní nutnost)
cover	IP20
Channels	4x binary, voltage and current input
Dimensions without connectors	178 x 95 x 37mm, without attached probes

Download

i-mlg-m1xxx-09.pdf (pdf, 2.5 MB)

i-mlg-quick.pdf (pdf, 1.1 MB)

a-mlg-m1xxx.pdf (pdf, 101.2 kB)

mibtables.zip (zip, 540.5 kB)

cz_comet_multilogger.pdf (pdf, 2.1 MB)

comet_vision-2-1-7367-23596_dbapi-19-0.exe (exe, 15.1 MB)

dbviewer-3-12-0-0_dbapi-19-0.exe (exe, 22.1 MB)

In this section, you will find answers to frequently asked questions regarding use, measurement accuracy, verification, and calibration. If you cannot find the information you are looking for here, please do not hesitate to contact us—we will be happy to provide you with details based on how you use the measuring device. Telefon: +420 771 230 755 E-mail: kalist@kalist.cz

Related products5

DIGIL humidity probe wall mount

Immediately in stock

6,98 € excl. VAT

8,45 € incl. VAT

Temperature range (max)	600 °C
Temperature range (min)	-200 °C

Temperature range (max)	1800 °C, depends on the type of sensor
Temperature range (min)	-200 °C, depends on the type of sensor

Temperature range (max)	70 °C
Temperature range (min)	-30 °C

Temperature range (max)	250 °C
Temperature range (min)	-50 °C