Digital control thermometer with DT-3 sensor | CALIBRATION option

Control digital thermometer with probe Termoprodukt DT-3-ST-05-S

Add to favourites Add to compare list

Control digital thermometer with probe Termoprodukt DT-3-ST-05-S

can be calibrated probe IP65
Calibration sheet Accredited
Termoprodukt The DT-3 digital control thermometer with probe is designed for temperature measurement in the range of -30°C to +180°C. The DT-3 thermometer is suitable for measuring air, gases, liquids and soft media. The probe type Pt1000 has a diameter of 4,0 mm and a length of 50 mm. The operating temperature of the cable is -30 °C to +180 °C.
If you are interested, we can calibrate the thermometer and issue a calibration certificate. More
Product code: DT-3/ST-05/S Shipping and Payment
from 52,15 € excl. VAT (63,10 € incl. VAT)
Specify product selection
Variant does not exist
No calibration Calibration -20°C/0°C/+20°C Calibration for refrigerators +2°C/+4°C/+8°C Calibration for drug storage 0°C/+15°C/+25°C Calibration at room temperature +10°C/+20°C/+30°C Temperature calibration - own 3 calibration points
Termoprodukt The DT-3 digital control thermometer with probe is designed for temperature measurement in the range of -30°C to +180°C. The DT-3 thermometer is suitable for measuring air, gases, liquids and soft media. The probe type Pt1000 has a diameter of 4,0 mm and a length of 50 mm. The operating temperature of the cable is -30 °C to +180 °C.
If you are interested, we can calibrate the thermometer and issue a calibration certificate. More
Product code: DT-3/ST-05/S Shipping and Payment

Accessories2

Next

The DT-3 digital control thermometer with probe is designed for temperature measurement in the range of -30°C to +180°C.  The DT-3 thermometer is suitable for measuring air, gases, liquids and soft media.  The probe type Pt1000 has a diameter of 3.3 mm. If you are interested, we can calibrate the thermometer and issue a calibration certificate. 

Features:

  • measurement in °C
  • resolution 0.01°C
  • measurement and refresh interval on the display 15 seconds
  • Li-ion 3.7V 800mAh battery (the charger is not included)
  • working time of a charged battery approx. 8 months
  • minimum and maximum temperature display
  • max/min temperature recording
  • low battery indication
  • high accuracy
  • PT1000 sensor
  • exceeding the permissible values is indicated by an audible and visual signal
  • display backlight
  • magnetic holder
  • external probe

Temperature reading every 15 seconds.

The thermometer has a display that shows the current, minimum and maximum temperature. The measuring element of the probe is the PT1000 sensor.

The thermometer is equipped with an ST-05 probe, its cable has silicone insulation and is waterproof.

The wide measuring range and high accuracy of -/+0.05°C in the range (0°C to 100°C) make it possible to get an accurate temperature measuring instrument at an affordable price.

The thermometer has a light and sound alarm function for exceeding MIN/MAX temperature. A neodymium magnet embedded in the bottom of the housing allows the instrument to be attached to metal surfaces.

The thermometer is powered by a 3.7 V, 800 mAh Li-ion battery with a lifetime of approx. 10 years (battery replacement is trouble-free). The charger can be found in the accessories category of the product is not included. 

The average charging time of the battery is 1.5h and is sufficient for approximately 8 months of continuous work.

It is recommended to store an unused thermometer at a temperature of 23 -/+2°C. 

The text was translated by an automatic translator.

Parameters
Meter function MAX / MIN - save the maximum and minimum value ALARM - signaling when the set value is exceeded
Temperature range (max) 180 °C
Temperature range (min) -30 °C
Temperature resolution 0,01 °C
Temperature measurement accuracy -/+0,15°C (-50°C to 0°C ) -/+0,05°C (0°C to 100°C) -/+0,10°C (100°C to 150°C) -/+0,25°C (150°C to 200°C)
Sensor type Pt1000
power supply Micro USB conector, Li-ion battery 3,7V 800mAh
cover IP65 electronics, IP68 temperature sensor
Dimensions: 60 x 120 x 20 mm
probe length 50 mm
Download
Návod k použití DT1, DT3, DT16.pdf (pdf, 286.5 kB)
In this section, you will find answers to frequently asked questions regarding use, measurement accuracy, verification, and calibration. If you cannot find the information you are looking for here, please do not hesitate to contact us—we will be happy to provide you with details based on how you use the measuring device. Telefon: +420 771 230 755 E-mail: kalist@kalist.cz

Related products17

Next

Alternative products8

Next
%s ...
%s
%image %title %code %s
%s