Comet T3111 temperature and humidity sensor with 4-20mA output :: KALIST AKL s.r.o.

Comet T3111 temperature and humidity sensor with 4-20mA output

Add to favourites Add to compare list

Comet T3111 temperature and humidity sensor with 4-20mA output

can be calibrated 3 years warranty IP65
Extended Warranty Calibration sheet Accredited Authorized sales IP65 certification
Comet The Comet T3111 sensor is designed to measure temperature and humidity using an external probe. The instrument comes standard with a T+RV probe on the cable, the length of the cable can be selected in the product configuration. It can also convert the measured temperature and humidity to dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. The measured values including the calculated quantities are displayed on the LCD. The instrument is designed for measuring air without aggressive impurities. The setting of the sensor is carried out using the TSensor program and a personal computer connected via the COM-SP003 communication cable (cable not included). We can provide you with a calibration certificate for accurate measurements. You can select the calibration in the form next to the product. More
Product code: COM-T3111/1-4 Shipping and Payment
from 240,87 € excl. VAT (291,45 € incl. VAT)
Specify product selection
Variant does not exist
No calibration Calibration of the logger for refrigerators +2°C/+4°C/+8°C Logger calibration for medicine storage 0°C/+15°C/+25°C Logger calibration at room temperature +10°C/+20°C/+30°C Logger humidity calibration 50%/60%/70% Temperature and humidity logger calibration +10°C/+20°C/+30°C, 50%/60%/70% Temperature and humidity calibration of the logger - own calibration points Logger temperature calibration - own 3 calibration points Logger humidity calibration - own 3 calibration points
Comet The Comet T3111 sensor is designed to measure temperature and humidity using an external probe. The instrument comes standard with a T+RV probe on the cable, the length of the cable can be selected in the product configuration. It can also convert the measured temperature and humidity to dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. The measured values including the calculated quantities are displayed on the LCD. The instrument is designed for measuring air without aggressive impurities. The setting of the sensor is carried out using the TSensor program and a personal computer connected via the COM-SP003 communication cable (cable not included). We can provide you with a calibration certificate for accurate measurements. You can select the calibration in the form next to the product. More
Product code: COM-T3111/1-4 Shipping and Payment

Features and Benefits of Comet T3111

  • Temperature and humidity probe on a cable in three lengths.
  • Can be connected to MS55D, MS6 or Ethernet.
  • The sensor can calculate quantities such as dew point, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
  • The sensor can be set up using the TSensor operating software, which is available as a free download.
  • Current output - two-wire connection 4-20 mA, galvanically isolated.
  • Extended warranty 3 years.

Included:

  • T3111
  • Instructions for use
  • FREE TSensor setup software
The text was translated by an automatic translator.
Parameters
Advanced features 4-20 mA Display Dew point Extended Warranty IP protection Relative humidity Temperature
Temperature range (max) 105 °C
Temperature range (min) -30 °C
Temperature resolution 0,1 °C
Temperature measurement accuracy ± 0,4 °C
Humidity measurement range 0 to100%
Humidity measurement accuracy ± 2.5% RH from 5 to 95% at 23°C
cover IP40, IP65, IP65 elektronika / IP40 senzory
Dimensions: 88,5 x 145 x 39,5 mm / průměr externí sondy 18 mm
Download
i-snc-t3111-14.pdf (pdf, 1015.7 kB)
i-snc-n-tx1-2-xx.pdf (pdf, 1019.8 kB)
a-snc-txxxx.pdf (pdf, 103.9 kB)
cz_comet_analog_sensors.pdf (pdf, 2 MB)
conversions.exe (exe, 694.5 kB)
In this section, you will find answers to frequently asked questions regarding use, measurement accuracy, verification, and calibration. If you cannot find the information you are looking for here, please do not hesitate to contact us—we will be happy to provide you with details based on how you use the measuring device. Telefon: +420 771 230 755 E-mail: kalist@kalist.cz

Related products4

Next

Alternative products13

Next
%s ...
%s
%image %title %code %s
%s